Supply WOODWARD 5462-744 PLC CARD Wholesale Factory

Key Parameters

1.Input Voltage:	Typical Input Voltage:	24V DC
1.Input Voltage:	Operating Voltage Range:	18V to 32V DC
2.Input Signals:	Digital Inputs:	6 configurable inputs
2.Input Signals:	Analog Inputs:	4 isolated analog inputs, typically ±10V or 0-20mA
3.Output Signals:	Digital Outputs:	4 relay outputs, each rated for 1A at 30V DC
3.Output Signals:	Analog Outputs:	2 analog outputs, typically ±10V or 0-20m
4.Communication Interfaces:	Serial Ports:	RS-232 and RS-485 for communication
4.Communication Interfaces:	Protocols Supported:	Modbus RTU, CAN bus

Application

• The EPG is used to control the speed of diesel, gas, and gasoline engines. It can also control the speed of gas turbines. Installation of EPG actuators is simple because they require neither mechanical drive nor hydraulic supply.

• The EPG handles prime movers with mechanical loads and generator loads equally well. Generator sets which will be paralleled, however, require additional appropriate switch gear, current and potential transformers, and the Woodward Generator Load Sensor.

• An EPG is a three-component system, requiring a magnetic pickup, speed control, and actuator. A battery charger must be used to keep the battery charged. Maximum steady state current consumption is 4 A for the 12-volt models (512/1712), and 3 A for the 24-volt models (524/1724).

If you want to more details，please contact me without hesitate.Email：sales@sparecenter.com