Product Specification
| Brand/Manufaturer: | General Electric |
| Country of Origin: | USA |
| Product No. : | IC697PWR710K |
| Product Type: | POWER SUPPLY PLC MODULE |
| Input Power: | 90 watts at full load |
| Output Current Capacity: | Up to 11 Amps (for +5VDC) |
| Overvoltage Limit: | 6.2 VDC |
| DC Output: | + 5VDC up to 11 amps |
| Input Voltage Range: | 90 to 264 VAC or 100 to 150 VDC |
| Storage Temperature: | −40∘C to 85∘C (−40∘F to 185∘F). |
| Operating Temperature: | 0∘C to 60∘C (32∘F to 140∘F) |
| Nominal Rated Voltage： | 120/240 VAC or 125 VDC |
If you want to more details，please contact me without hesitate.Email：sales@sparecenter.com
Product Details
GE IC697PWR710K More Details | The GE IC697PWR710K is a Power Supply Module specifically designed for the GE Fanuc Series 90-70 PLC platform. This rack-mounted unit is essential for energizing the various modules within the PLC system, providing the crucial backplane power needed for their operation. | ||
Versatile Input Power: This Power Supply Module offers exceptional flexibility, capable of operating from a wide range of input voltages including 120/240 VAC or 125 VDC. This broad compatibility makes it suitable for diverse industrial settings globally. Essential Backplane Power: It provides the critical +5VDC power to the Series 90-70 backplane, supplying up to 11 amps. Dual Rack Operation: A single IC697PWR710K can power not just one rack, but two. With the use of an available prewired cable, it can extend its backplane power supply to a second rack, provided the total load remains within its rated capacity. Robust Protection Features: To safeguard the entire PLC system, the module incorporates electronic overvoltage and overcurrent protection on the +5V bus. Power Factor Correction (PFC): For AC inputs, the module includes active power factor correction. Ride-Through Capability: The power supply is designed to "ride through" short power disturbances, with a minimum ride-through time of 21 milliseconds (from loss of AC input at full load). ack-Mounted, Single-Slot Design: The module is designed for easy installation, plugging directly into the leftmost slot of any standard 1797-series rack via a 48-pin connector. | |||
Product Photos
Other Modules
| General Electric | DS200TBCAG1AAB | Analog I/O Terminal Board |
| General Electric | DS200TBQBG1ACB | TERMINAL BOARD |
| General Electric | DS200TBQCG1ABB | RST Analog Termination Board |
| General Electric | DS200TCCAG1BAA | ANALOG I/O CONTROL CARD |
| General Electric | DS200TCPSG1AME | Power Supply Card |
| General Electric | DS200TCPSG1APE | Power Supply DC Input Board |
| General Electric | DS215TCQAG1BZZ01A | MARK V Analog I/O Board |
| IC697PWR710K GE | IS220PTURH1A | Primary Turbine Protection Pack |
| IC697PWR710K GE | IC660BRD024C1 | Genius 12/24VDC Source Block for Redundancy T Output Configurations |
| IC697PWR710K GE | GE IS200TRLYH1BED GE IS200TRLYH1BED | GE IS200TRLYH1BED GE IS200TRLYH1BED |
| IC697PWR710K GE | General ELectric IS200TRLYH1BED | IC697PWR710K GE |
| IC697PWR710K GE | General ELectric IS200TRLYH1BED | General Electric Module |
| IC697PWR710K GE | GE POWER SUPPLY PLC MODULE | GE POWER SUPPLY PLC MODULE |
| IC697PWR710K GE | GE POWER SUPPLY PLC MODULE | GE POWER SUPPLY PLC MODULE |
Mobile/what's app: +852 6980 6006
Email: sales@sparecenter.com
