IC697MDL740 GE Output Module

The GE Fanuc IC697MDL740 is a discrete output module that can be used to power devices like motor starters, solenoids and indicators. These loads can be connected to one of the module's 16 outlet points that are grouped into clusters of four points. The output provided to each of these points is 24/48 Volt direct current at a rate of 2 amperes per point of long-term current. The input surge conduction capacity of the IC697MDL740 is, however, more significant than 2 amperes. Each of the output point clusters has a common 10-ampere fuse.

16 Discrete Outputs: Each point delivers 24/48VDC at 2A continuous current, ideal for powering devices such as motor starters, solenoids, and indicators.Surge Conduction: Supports higher surge conduction capacity than 2A, ensuring durability during high inrush conditions.LED Indicators: Provides visual status feedback for each output and fuse, aiding troubleshooting and monitoring.No DIP or Jumpers Required: Configuration is done through Windows or MS-DOS software via SNP or Ethernet TCP/IP, simplifying setup.Common Fuse Protection: Each cluster of four outputs shares a 10A fuse for additional safety and reliability.

The 24/48 Volt DC 2 Amp Output Module provides 16 output points in four isolated groups of four points each. This allows each group of four points to be used on different phases of the AC supply.  Each group of four outputs is individually fused with a 10-amp fuse. The module provides a high degree of inrush current capacity, which makes the outputs suitable for a wide range of inductive and incandescent loads.  These outputs will pick up most size-4 contactors. LED indicators at the top of the module provide the ON/OFF status of each point on the logic side of the circuit.