IC200UDD104-BG GE 14-Point Micro PLC Module

DC Power:If configured to disable power-up diagnostics, the PLC begins logic solution 100ms after the voltage level of the power supply input reaches and maintains its nominal voltage (24Vdc). The power source for the PLC must have enough transient current capability to support the inrush current of the power supply and to maintain the nominal voltage level (see power supply specifications for inrush requirements). 

DC Inputs: The module’s eight configurable DC inputs can be used as standard or High-Speed Counter inputs. Each input can have positive or negative logic characteristics. When used as standard inputs, they are compatible with a wide range of devices, such as pushbuttons, limit switches, and electronic proximity switches. The Micro PLC DC supply can be used for input devices and to power the DC input circuits at about 7.5 mA per input. The combination of input circuit current and external device current must not exceed 200 mA. 

Outputs :All outputs are isolated between field and logic and are switching positive voltage.  The outputs can be configured as regular outputs or as outputs controlled by the HighSpeed Counters. Some outputs can be used as pulse train or pulse width modulation (PWM) outputs.