Supply HIRSCHMANN MS2108-2 MICE SWITCHING MODULE Wholesale Factory

General technical data
Dimensions W x D x H	MS2108-2	317 mm x 134 mm x 140 mm
Weight	MS2108-2	2.0 kg
Power supply	Operating voltage	24 V DC -25% +33% safety extra-low voltage (SELV/PELV) redundant inputs disconnected. Relevant for North America: Nec Class 2 power source max. 5A.
Overload current protection at input		Non-replaceable fuse
Insulation voltage between operating voltage connections and housing		800 V DC Protective elements limit the insulation voltage to 45 V DC (1 mA).
Signal contact	Switching current	max. 1 A, SELV
	Switching voltage	max. 60 V DC or max. 30 V AC, SELV
Environment	Storage temperature	Ambient air: -40 °C to +70 °C
	Humidity	10 % to 95 % (non-condensing)
	Atmospheric pressure	Up to 2000 m (795 hPa), higher altitudes on request
Pollution degree	2
Protection classes	Laser protection Level of protection	Class 1 according to EN 60825-1 (2001) IP20

Electricity is used to operate this equipment. Comply with every detail of

the safety requirements specified in the operating instructions regarding

the voltages to apply.

Non-observance of these safety instructions can therefore cause material

damage and/or injuries.

Only appropriately qualified personnel should work on this device or in
its vicinity. Qualified personnel must be thoroughly familiar with the
warnings and maintenance procedures in accordance with this
operating manual.
The proper and safe operation of this device depends on proper
handling during transport, proper storage and assembly, and
conscientious operation and maintenance procedures.
Never start operating the device with damaged components.
Only use the devices in accordance with this manual. In particular,
observe the warnings and safety-related information.
Any work that may be required on the electrical installation may
only be carried out by personnel trained for this purpose.