Supply DI260/A KEBA Digital Input Module Wholesale Factory

KEBA DI260/A Specifications

Model	DI260/A
Power supply voltage:	24 V DC from K Bus 5 V DC from K Bus
Overvoltage category:	II
Equipment class:	III according to EN 61131-2:2007
Addressing at K-Bus:	Via 16-digit address switch, on the side
Connection terminals:	Open terminals, grid dimensions 5.08 mm
Max. power consumption K Bus 24 V:	2.1 W
Max. power consumption K Bus 5 V:	0.4 W
Environmental conditions
Operating temperature:	+5 °C to +55 °C
Storage temperature:	-40 °C to 70 °C
Relative humidity of air:	10 % to 95 % (non condensing)
Vibration resistance:	according to EN 61131-2:2007
Shock resistance:	according to EN 61131-2:2007

Details of KEBA DI260/A

Intended use

The DI 260/A was developed for control applications in industrial machines. The typical applications areas include injection molding machines, robots, presses, machine tools and similar.

The DI 260/A may only be used for the types of use described in the technical descriptions and only in conjunction with recommended/approved third-party equipment/installations.

Configuration

A Kemro system needs data for the configuration of system performance, its I/O-devices and interfaces. The system reads this data during the start-up operation and allocates them to its components and devices. Configuration data is created by included configuration tools or by editing configuration files. For further information to the configuration see the documentation of the included configuration tool.

Feature

Output Options: Supports 8 or 14 digital outputs for versatile application requirements.

Short-Circuit Detection: Includes short-circuit detection and diagnosis capabilities for improved safety.

Permanently Short-Circuit Proof: Designed to be permanently short-circuit proof, ensuring reliable operation under fault conditions.

Current Load Capacity: Provides a current load capacity of 2 A at 50% simultaneity, effectively managing multiple outputs simultaneously.

If you want to more details，please contact me without hesitate.Email：sales@sparecenter.com

Preconditions And Connection diagram

Target group		Knowledge and skills pre-requirement	Connect Diagram
Project engineer	Basic technical training (University of Applied Science/University level, engineering degree or corresponding professional experience). Knowledge in: ● working mode of a PLC, ● safety regulations, ● the application.
Operator	Basic technical training (Vocational high school, engineering degree or corresponding professional experience). Knowledge in: ● safety regulations, ● working mode of machine or plant, ● principal functions of the application, ● system analysis and troubleshooting, ● setting options at the operating installations.
Service technician	Basic technical training (Vocational high school, engineering degree or corresponding professional experience). Knowledge in: ● working mode of a PLC, ● safety regulations, ● working mode of machine or plant, ● diagnosis possibilities, ● systematic error analysis and rectification.