Product Parameters
| Input Voltage Range: | 380-480 V AC (three-phase) |
| Output Voltage: | 220 V AC, 380 V AC, or other specified voltages |
| Power Rating: | Maximum power of 400 kW |
| Efficiency: | Up to 98% conversion efficiency |
| Frequency Range: | 50/60 Hz |
| Operating Temperature Range: | -10°C to +50°C |
| Dimensions and Weight: | 600 mm x 800 mm x 1200 mm |
Connector Legend
This legend shows the location of the main IO connectors on the AMC Controller.
LAN 1 to 5 are the RJ45 connectors for the network ports.
COM 1 to 4 are the serial ports. These are standard PC RS232 ports with the standard 9 way D Connector pinout. Port 1 is reserved for the controller console port. Ports 2 to 4 are available for application use.
LPT1 is the parallel port. This is used for the Parallel Port Identity Dongle.
VGA is the standard PC display output. This only displays anything interesting during boot up. It is principally used by the supplier when initially configuring the AMC.
KBD is the PC keyboard. Again this is principally used by the supplier when initially configuring the AMC.
The power supply input is on the right hand side, using a 2 part screw terminal connector.
The recessed power switch is also on the right hand side. Pressing the top of the switch (nearest the top panel) turns the unit on.
The legend also shows a representation of the air intake grill for the AMC (which is convection cooled). Visible through the grill is another PSU LED on the CPU board itself.
If you want to more details，please contact me without hesitate.Email：sales@sparecenter.com
Patch Cable Legend
Underneath the LEDs is a legend which describes the patch cable colour recommendations for the common network configurations. The recommended colour conventions are:
RED for Arm A of Dual Ethernet Network 1, '1A'
BLUE for Arm B of Dual Ethernet Network 1, '1B'
YELLOW for Arm A of Dual Ethernet Network 2, '2A'
WHITE for Arm B of Dual Ethernet Network 2, '2B'
BLACK for other private networks e.g. to the Wago IO nests. Note that Cross-over patch cables should be marked with some identifier e.g. a heat shrink sleeve of a contrasting colour or with a "crossover" legend.
Other Module
Allen BradleyCONVERTEAM 8961-4001 8961-4001-CNCONVERTEAM CONVERTER MODULE Allen BradleyCONVERTEAM 8961-4001CONVERTEAM CONVERTER MODULECONVERTEAM 8961 Allen BradleyCONVERTEAM 8961-4001CONVERTEAM CONVERTER MODULECONVERTEAM 8961 CONVERTEAM 8961-40018961-4001-CN CONVERTEAM 8961-4001 CONVERTEAM 8961-4001 Allen Bradley2198-D006-ERS3Kinetix 5700 Servo CONVERTEAM 8222-4001CONVERTEAM 8222 8222-4001-CN 8222-4001-CN 8222-4001-CN 8222-4001-CNCONVERTEAM 4001CONVERTEAM 4001 Allen Bradley2711P-RP2PanelView Plus Logic ModuleCONVERTEAM Power Supply Module 8961-4001-CN8961-4001-CN8961-4001-CN8961-4001-CN8961-4001-CN8961-4001-CN8961-4001-CN Allen Bradley80190-100-01-RFiber Optic BoardCONVERTEAM CONVERTER MODULE8961-4001-CN Allen Bradley80190-480-01-RPowerflex 7000 CONVERTEAM CONVERTER MODULECONVERTEAM 4001 Allen Bradley80190-520-01-RFiber CONVERTEAM Power Supply ModuleCONVERTEAM 8222 8222-4001-CN 8222-4001-CN CONVERTEAM 8961-4001 CONVERTEAM 8961-4001CONVERTEAM 8961-4001 Woodward CONVERTEAM 4001 Woodward CONVERTEAM 4001CONVERTEAM 8222CONVERTEAM 8222 Woodward Module Woodward Module Woodward Module Woodward Module 5462-718 5462-718 5462-718 CONVERTEAM 4001CONVERTEAM 4001CONVERTEAM 4001CONVERTEAM 4001CONVERTEAM 4001 CONVERTEAM 8961 CONVERTEAM 8961 CONVERTEAM 8961 Woodward ModuleCONVERTEAM 4001 |
Mobile/what's app: +852 6980 6006
Email: sales@sparecenter.com
