Supply BENTLY NEVADA 330730-040-01-00 Proximity Probes Wholesale Factory

Environmental Limits

Probe Temperature Range
Operating and Storage Temperature
Standard Probe	-52°C to +177°C (-62°F to +350°F)
Extended Temperature Range Probe	-52°C to +218°C (-62°F to +425°F) for the probe tip; - 51°C to +260°C (-60°F to +500°F) for the probe cable and connector.
Probe Pressure
3300 XL 8 mm probes are designed to seal differential pressure between the probe tip and case. The probe sealing material consists of a Viton® O ring. Probes are not pressure tested prior to shipment. Contact our custom design department if you require a test of the pressure seal for your application.
Extension Cable Temperature Range
Operating and Storage Temperature
Standard Cable	-52°C to +177°C (-62°F to +350°F)
Extended Temperature Range Cable	-52°C to +260°C (-62°F to +500°F)
Proximitor Sensor Temperature Rang
Operating Temperature	-52°C to +100°C (-62°F to +212°F)
Storage Temperature	-52°C to +105°C (-62°F to +221°F)
Probe Relative Humidity
Less than a 3% change in Average Scale Factor (ASF) when tested in 93% humidity in accordance with IEC standard 68 2 3 for up to 56 days.

Key Functions

Shaft Position Monitoring:

It accurately measures the position of rotating shafts, providing critical data for machinery health assessment.

Vibration Measurement:

The system detects and analyzes vibrations in equipment, helping to identify issues such as misalignment, imbalance, or wear.

Condition Monitoring:

Continuous real-time monitoring allows for early detection of potential failures, enabling proactive maintenance and reducing the risk of unexpected downtime.

Protective Functionality:

By monitoring key parameters, the probe contributes to protective systems that prevent equipment damage and operational hazards.

If you want to more details，please contact me without hesitate.Email：sales@sparecenter.com

Compliance and Certifications

FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation
EMC
European Community Directive: EMC Directive 2014/30/EU
Standards
EN 61000-6-2; Immunity for Industrial Environments EN 61000-6-4; Emissions for Industrial Environments
RoHS
European Community Directive: RoHS Directive 2011/65/EU