Product Data
| Ambient temperature | 0° to 70°C (32° to 158°F) | ABB IMHSS03 |
| Relative humidity | 5% to 95% up to 55°C (131°F) (noncondensing) | IMHSS03 |
| Relative humidity | 5% to 45% at 70°C (158°F) (noncondensing) | ABB Hydraulic Servo module |
| Altitude | Sea level to 3 km (1.86 miles) | ABB board |
| Air quality | Noncorrosive | ABB processor module |
Email：sales@sparecenter.com
Overview
Typical uses for the module are positioning of steam turbine throttle and control valves, gas turbine fuel valves, inlet guide vanes, and nozzle angle. By regulating the current to the servo valve,
the IMHSS03 module can initiate a change in actuator position.
The hydraulic actuator can then
position, for example, a gas turbine fuel valve or a steam
governor valve. As the valve opens or
closes, it regulates fuel or steam flow to the turbine,
thus controlling the turbine speed. A linear
variable differential transformer (LVDT) provides actuator
position feedback to the hydraulic servo module.
ABB IMHSS03 ABB processor module ABB board
ABB IMHSS03 ABB Hydraulic Servo module
ABB board ABB processor module ABB board
The IMHSS03 Hydraulic Servo module is a valve position control
module. It provides an interface through which a Harmony controller can
drive a servo valve or I/H converter to provide manual or automatic control
of a hydraulic actuator. The controller utilizes function code 55 or 150 (hydraulic servo)
to configure and access the module input/output channels.
The IMHSS03 module is an intelligent I/O module with an onboard
microprocessor, memory, and communication circuitry. In most applications,
the IMHSS03 module works with the IMFCS01
Frequency Counter module.
ABB IMHSS03 ABB Hydraulic Servo module ABB board
ABB IMHSS03 ABB processor module ABB board
ABB IMHSS03 ABB Hydraulic Servo module
ABB board ABB processor module ABB board
The ABB IMHSS03 is a Hydraulic Servo Module for the ABB Bailey Infi 90 distributed control system (DCS). It acts as an interface between the DCS and a hydraulic actuator, enabling precise control of valves and other hydraulic equipment.
Function：
Receives control signals from the Infi 90 DCS.
Converts these signals into hydraulic pressure or flow commands for the connected actuator.
Provides manual control options for the actuator through an onboard interface.
ABB IMHSS03 ABB processor module ABB board
ABB IMHSS03 ABB processor module ABB board
ABB IMHSS03 ABB Hydraulic Servo module
ABB board ABB processor module ABB board
If you want to more details，please contact me without hesitate.
Email：sales@sparecenter.com
Picture details
ABB IMHSS03
ABB board
IMHSS03
More models
ABB DSTK165 26390603-AN Ribbon Cable
ABB086339-001Control/Interface Board ABB board
ABBPFEA112-20 3BSE050091R20Tension Electronics
ABB3HAC024322-001Mains Line Filter ABB board
ABBYPK112A 3ASD573001A13Communication Module
ABBYPP110A 3ASD573001A1Communication Module
ABBOS30AJ12FUSIBLE DISCONNECT SWITCH
SIEMENS39MBXNAN 16180-1/17Moore MBX Modulbus Expander Module
SIEMENS39RTMCAN 16207-61/10Resitance Temperature Module
SIEMENS39RTMCAN 16207-61/11Resitance Temperature Module
SIEMENS39RTMCAN 16207-61/13Temperature Module
SIEMENS39SAMCAN 16133-71/04Standard Analog Module
SIEMENS39SAMCAN 16133-71/9Standard Analog Module
SIEMENS39SDM024DCCBN 16101-174/8SDM+Standard Discrete Module
SIEMENS39VIMCCN 16171-126/3VIM Voltage Input Module
General ElectricUR67HMultilin Digital I/O Module
General ElectricIC200PBI001VersaMax Profibus Network Interface Unit
General ElectricIC697CGR935Single Slot CPU
General ElectricUR8NHMultilin Ur Controller Module
General ElectricUR 7HH UR7HHMultilin Communication Module
General ElectricIC660BRD025Genius 32-Circuit Sink block
General ElectricIS220PAOCH1AMark VIe Analog Output Module
General Electric IS420ESWBH3A Ethernet Switch
ABB IMHSS03 ABB Hydraulic Servo module ABB board
Email：sales@sparecenter.com
