Specifications
Bently Nevada 990-16-XX-01-CN | ||
Current limiting | 23 mA typical. | Bently Nevada 990 Vibration Transmitter |
Maximum loop resistance | 1,000 Ω including cable at 35 Vdc. | Bently Nevada proximity probe |
Minimum target size | I9.5 mm (0.375 in) diameter. | 990-16-XX-01-CN |
Details
The Bently Nevada 990 Vibration Transmitter is intended primarily for the original equipment manufacturers (OEMs) of centrifugal air compressors or small pumps, motors, or fans who prefer to
provide a simple 4 to 20 mA proportional vibration signal as the input to their machinery control system. The transmitter is a two-wire, loop-powered device that accepts input from
our Bently Nevada proximity probe and its matching extension cable (available in 5 m and 7 m system length options). 990-16-XX-01-CN
The transmitter conditions the signal into appropriate peakto-peak vibration amplitude engineering units, and provides this value as a proportional 4 to 20 mA industry-standard
signal as the input to the control system where machinery protection alarming and logic occurst. 990-16-XX-01-CN
If you want to more details，please contact me without hesitate.Email：sales@sparecenter.com
Hot Selling Moudles
3300 XL Proximity Probe
The 3300 XL 8 mm system delivers the advanced performance in our eddy current proximity transducer systems.
The standard 3300XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical
configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance
and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate
individual components.
Bently Nevada 3500/05-01-01-00-00-01 System Rack
Bently Nevada330104-00-10-10-02-053300 XL 8 mm Proximity Probe
Bently Nevada 330980-71-CN 3300 NSv Proximitor Sensor
Bently Nevada proximity probe 990-16-XX-01-CN Bently Nevada 990 Vibration Transmitter
Bently Nevada 990-16-XX-01-CN Bently Nevada 990 Vibration Transmitter
3500/42 Monitor Module
The primary purpose of the 3500/42 monitor is to provide 1) machinery protection by continuously comparing current machine
vibration against configured alarm setpoints to drive alarms and, 2) essential machine vibration information to both operator and
maintenance personnel. Alarm setpoints are configured using the 3500 Rack Configuration Software. Alarm setpoints can be
configured for each active proportional value and danger setpoints can be configured for two of the active proportional values.
BENTLY NEVADA 26363-30 proximity probe
BENTLY NEVADA84510-33Proximity Probe
BENTLY NEVADA 4454-156 Thermal Couple Heat Sensor
Bently Nevada 990-16-XX-01-CN proximity probe 990 Vibration Transmitter
Bently Nevada proximity probe 990-16-XX-01-CN Bently Nevada 990 Vibration Transmitter
Bently Nevada proximity probe 990-16-XX-01-CN Bently Nevada 990 Vibration Transmitter
Bently Nevada 990-16-XX-01-CN Bently Nevada 990 Vibration Transmitter
3300 Proximitor Sensor
The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density
DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting “footprint” with
older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.
The 3300 XL Proximitor Sensor is highly immune to radio frequency interference, allowing you to install it in fiberglass housings without adverse effects
from nearby radio frequency signals.
Bently Nevada 990-16-XX-01-CN Vibration Transmitter
Bently Nevada 990-10-XX-01-CN 167541-01 Vibration Transmitter
Bently Nevada 990-10-XX-01-05 MOD:285269-01 Vibration Transmitter
Bently Nevada proximity probe 990-16-XX-01-CN Bently Nevada 990 Vibration Transmitter Bently Nevada proximity probe
3500 Power Supply
The 3500/15 Power Supply can be ordered for ac or dc input power, providing compatibility with voltage sources worldwide. Line noise filters are standard. The 3500 Rack can operate from a single supply, or dual supplies can be used to provide redundancy for situations that cannot tolerate power interruption. Dual supplies reside in the upper and lower positions of the left rack slot. Redundant supplies can use separate voltage sources. For example, the primary (lower) supply can operate with 120 Vac power while the backup (upper) supply can be powered from an uninterruptible 24 Vdc source. Each supply can individually provide power to the entire rack and its modules.
Bently Nevada 3500/15 127610-01 Power Supply Module
Bently Nevada 3500/15 106M1079-01 Power Supply Module
Bently Nevada proximity probe 990-08-XX-01-00 Bently Nevada 990 Vibration Transmitter Bently Nevada proximity probe
Bently Nevada 990-16-XX-01-CN Bently Nevada proximity probe
Bently Nevada 990-16-XX-01-CN
1900/65A
The 1900/65A General Purpose Equipment Monitor is designed to continuously monitor and protect equipment that is used in a variety of applications and industries.
The monitor’s low cost makes it an ideal solution for generalpurpose machines and processes that can benefit from continuous monitoring and protection. Inputs The
1900/65A provides four transducer inputs and four temperature inputs. Software can configure each transducer input to support 2- and 3-wire accelerometers, velocity
sensors or proximity sensors. Each temperature input supports Type E, J, K, and T thermocouples, and 2- or 3-wire RTDs. Outputs The 1900/65A provides six relay outputs,
four 4-20 mA recorder outputs, and a dedicated buffered output.
BENTLY NEVADA 102244-22-50-01 SERIES VIBRATION TRANSMITTER
BENTLY NEVADA330930-065-03-053300 XL NSv Extension Cable
BENTLY NEVADATACH100-01 174652-01Digital Tachometer
BENTLY NEVADA 88286-01J Terminal Board
Bently Nevada proximity probe 990-16-XX-01-CN Bently Nevada 990 Vibration Transmitter Bently Nevada proximity probe
