Specifications
| Full-Scale | 0-5 mils pp (0-125 μm pp) | 990-05-70-02-00 |
| System Length | 7.0 Meters (23.0 Feet) | Bently nevada proximity probe |
| Mounting | Bulkhead Screws | Bently nevada vibration |
| Power | 69.9 pF/m (21.3 pF/ft) typical | Bently Nevada 990-05-70-02-00 |
| Operating Temperature | -35 °C to +85 °C | Bently Nevada Vibration Transmitter |
Features:
Integrated Proximitor Sensor Requires no External Unit
Non-Isolated PROX OUT and COM Terminals Plus a Coaxial Connector
Non-Interacting Zero and Span Potentiometers
Test Input Pin for Quick Verification of Loop Signal Output
Not OK/Signal Defeat Circuit Prevents High Outputs or False Alarms
Potted Construction for High Humidity Environments (Up to 100% Condensing)
The Bently Nevada 990 Vibration Transmitter is intended primarily for the original equipment manufacturers (OEMs) of centrifugal air compressors or small pumps, motors, or fans who prefer to provide a simple 4 to 20 mA
proportional vibration signal as the input to their machinery control system.
If you need more models,pls contact us without hesitation.
Email:sales@sparecenter.com
Superiority products
Bently Nevada 330180 Proximity Transducer System
Bently Nevada 991 Vibration Transmitter
Bently Nevada 330130 Extension Cable
The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements3. Bently Nevada 9200-01-05-10-00Two-Wire Velocity Seismoprobe Transducer Bently Nevada9200-01-02-10-00 Bently Nevada Vibration Transmitter Bently Nevada3500/94M 184826-01VGA Display Module Bently Nevada3500/94 145988-01VGA Display Module Bently nevada vibration 990-05-70-02-00 Bently nevada proximity probe Bently nevada proximity probe Bently Nevada 990-05-70-02-00 Bently Nevada 990-05-70-02-00 Bently Nevada Vibration Transmitter | The 991 Thrust Transmitter is intended primarily for the original equipment manufacturers (OEMs) of centrifugal air compressors or small pumps, motors, or fans who prefer to provide a simple 4 to 20 mA proportional axial displacement (thrust) signal as the input to their machinery control system. The transmitter is a 2-wire, loop-powered device that accepts input from our 3300 NSv proximity probe and its matching extension cable (available in 5 m and 7 m system length options). The transmitter conditions the signal into appropriate engineering units proportional to the shaft’s axial position1, and provides it as a 4 to 20 mA industry-standard signal for input to the control system where machinery protection alarming and logic occurs2. Bently Nevada 3500/90Communication Gateway Module Bently Nevada3500/77M 140734-07Pressure Monitor Module Bently Nevada3500/72M 176449-08Recip Rod Position Monitor Bently Nevada3500/65 145988-02Temperature Monitor Bently Nevada Vibration Transmitter 990-05-70-02-00 Bently Nevada 990-05-70-02-00 Bently nevada vibration | The Bently Nevada 3300 XL 8mm Proximity Transducer System consists of one 3300 XL 8mm probe, one 3300 XL extension cable, and one 3300 XL Proximitor Sensor. The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute's (API) 670 Standard (4th Edition) for mechanical configuration, linear range, accuracy, and temperature stability. Bently Nevada 3500/61 163179-02 Temperature Monitor Bently Nevada3500/61 136711-02I/O Module Bently Nevada3500/60 163179-01Temperature Monitor Bently Nevada3500/60 133811-01Temperature Monitor Bently nevada proximity probe 990-05-70-02-00 Bently nevada vibration Bently Nevada 990-05-70-02-00 Bently nevada vibration Bently Nevada Vibration Transmitter Bently Nevada 990-05-70-02-00 |
Mobile/what's app: +852 6980 6006
Email: sales@sparecenter.com
