3500/15 127610-01 Bently Nevada AC Power Supply Module

Specifications

Hot Series：

3300 XL Proximity Probe

The 3300 XL 8 mm system delivers the advanced performance in our eddy current proximity transducer systems. The standard 3300XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components.

Bently Nevada 3300/50 3300 XL 8mm Proximity Probe

Bently Nevada 3300/47 3300 XL 8mm Proximity Probe

Bently Nevada 3300/45 3300 XL 8mm Proximity Probe

Bently Nevada 3300/35 3300 XL 8mm Proximity Probe

Bently Nevada 3300/20 3300 XL 8mm Proximity Probe

Bently Nevada 3300/16 3300 XL 8mm Proximity Probe

3300 Proximitor Sensor

The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting “footprint” with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates. The 3300 XL Proximitor Sensor is highly immune to radio frequency interference, allowing you to install it in fiberglass housings without adverse effects from nearby radio frequency signals.

Bently Nevada 330180-90-CN 3300 XL Proximitor Sensor

Bently Nevada 330180-90-00 3300 XL Proximitor Sensor

Bently Nevada 330180-92-05 3300 XL Proximity Sensor

Bently Nevada 330180-51-05 3300XL Proximity Sensor 

3500 Power Supply

The 3500/15 Power Supply can be ordered for ac or dc input power, providing compatibility with voltage sources worldwide. Line noise filters are standard. The 3500 Rack can operate from a single supply, or dual supplies can be used to provide redundancy for situations that cannot tolerate power interruption. Dual supplies reside in the upper and lower positions of the left rack slot. Redundant supplies can use separate voltage sources. For example, the primary (lower) supply can operate with 120 Vac power while the backup (upper) supply can be powered from an uninterruptible 24 Vdc source. Each supply can individually provide power to the entire rack and its modules.

Bently Nevada 3500/15 127610-01 Power Supply Module

Bently Nevada 3500/15 106M1079-01 Power Supply Module

1900/65A 

The 1900/65A General Purpose Equipment Monitor is designed to continuously monitor and protect equipment that is used in a variety of applications and industries. The monitor’s low cost makes it an ideal solution for generalpurpose machines and processes that can benefit from continuous monitoring and protection. Inputs The 1900/65A provides four transducer inputs and four temperature inputs. Software can configure each transducer input to support 2- and 3-wire accelerometers, velocity sensors or proximity sensors. Each temperature input supports Type E, J, K, and T thermocouples, and 2- or 3-wire RTDs. Outputs The 1900/65A provides six relay outputs, four 4-20 mA recorder outputs, and a dedicated buffered output.

Bently Nevada 1900/65A 172323-01/1900/65A 167699-02 3300 XL 8mm Proximity Probe

Bently Nevada 1900/65A 172323-01 1900/65A 167699-02 3300 XL 8mm Proximity Probe

Bently Nevada 1900/65 3300 XL 8mm Proximity Probe

3500/42 Monitor Module

The primary purpose of the 3500/42 monitor is to provide 1) machinery protection by continuously comparing current machine vibration against configured alarm setpoints to drive alarms and, 2) essential machine vibration information to both operator and maintenance personnel. Alarm setpoints are configured using the 3500 Rack Configuration Software. Alarm setpoints can be configured for each active proportional value and danger setpoints can be configured for two of the active proportional values.

Bently Nevada 3500/42M 176449-02 Proximitor Seismic Monitor

Bently Nevada 3500/42M 140734-02 Proximitor Seismic Monitor

Bently Nevada 3500/42E 289837-01 Aeroderivitive GT Vibration Monitor

The 990 Vibration Transmitter

The 990 Vibration Transmitter is intended primarily for the original equipment manufacturers (OEMs) of centrifugal air compressors or small pumps, motors, or fans who prefer to provide a simple 4 to 20 mA proportional vibration signal as the input to their machinery control system.

The transmitter is a two-wire, loop-powered device that accepts input from our 3300 NSv proximity probe and its matching extension cable (available in 5 m and 7 m system length options).The transmitter conditions the signal into appropriate peakto-peak vibration amplitude engineering units, and provides this value as a proportional 4 to 20 mA industry-standard signal as the input to the control system where machinery protection alarming and logic occurs.

Bently Nevada 990-16-XX-01-CN Vibration Transmitter

Bently Nevada 990-10-XX-01-CN 167541-01 Vibration Transmitter

Bently Nevada 990-10-XX-01-05 MOD:285269-01 Vibration Transmitter

Bently Nevada 990-10-XX-01-05 Vibration Transmitter

Bently Nevada 990-10-XX-01-00 MOD:165353-01 Vibration Transmitter

Bently Nevada 990-10-XX-01-00 283278-01 Vibration Transmitter

Bently Nevada 990-05-XX-03-CN 104M6732-01 Vibration Transmitter

What was Bentley's role in industrialization?

l Timely and Relevant Data Acquisition

l Advanced Analysis and Visualizations

l Accurate Machinery Condition Diagnosis

l Early Fault Detection

l Predictive Maintenance Planning

l Extended Machine Life

l Reduced Maintenance Costs and Downtime

l Maximized Production

l Comprehensive Plantwide Asset Management

We also have Allen Bradley, Bently Nevada GE, Honeywell, ABB, Fanuc, Invensys Triconex,Bachmann and more PLC DCS TSI spare parts.

If you need more brands or discount,pls contact us without hesitation.