Specifications
Bently Nevada 330130-040-02-CN Bently Nevada vibration | ||
Shaft Diameter Minimum | 50.8 mm (2 in) | Bently Nevada 330130 |
Recommended Minimum | 76.2 mm (3 in) | Bently Nevada vibration |
Frequency Response | 0 to 10 kHz | Bently Nevada Extension Cable |
with a -24 Vdc power supply, a 10
kΩ load, an AISI 4140 steel target, and a probe
gapped at 1.27 mm (50 mils). Performance
characteristics apply to systems
that consist solely of 3300 XL 8 mm components. The system accuracy and interchangeability specifications do not apply to transducer systems that are calibrated
to any target other than our AISI 4140 steel target. Bently Nevada vibration
Bently Nevada 330130-040-02-CN Bently Nevada Extension Cable
Bently Nevada Extension Cable 330130-040-02-CN Bently Nevada vibration
Bently Nevada vibration 330130-040-02-CN Bently Nevada Extension Cable
If you want to more details，please contact me without hesitate.
Email：sales@sparecenter.com
Mobile/what's app:+852 6980 6006
Hot Series：
3300 XL Proximity Probe
The 3300 XL 8 mm system delivers the advanced performance in our eddy current proximity transducer systems. The standard 3300XL 8 mm 5-meter
system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature
stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables,
and Proximitor sensors, eliminating the need to match or bench calibrate individual components.
Bently Nevada 3300/20 3300 XL 8mm Proximity Probe
Bently Nevada 3300/16 3300 XL 8mm Proximity Probe
Bently Nevada 330130 Bently Nevada Extension Cable
Bently Nevada 330130-040-02-CN Bently Nevada vibration
Bently Nevada vibration 330130-040-02-CN Bently Nevada Extension Cable
3300 Proximitor Sensor
The 3300 Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations.
You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting “footprint” with older Proximitor Sensor designs. The mounting
base for either option provides electrical isolation and eliminates the need for separate isolator plates. The 3300 XL Proximitor Sensor is highly immune to radio frequency interference,
allowing you to install it in fiberglass housings without adverse effects from nearby radio frequency signals.
Bently Nevada330930-065-01-053300 XL Extension Cable
Bently Nevada330930-065-00-CN3300 NSv Extension Cable
Bently Nevada 330930-065-00-053300 XL Extension Cable
Bently Nevada 330130 Bently Nevada Extension Cable
Bently Nevada vibration 330130-040-02-CN Bently Nevada vibration
Bently Nevada 330130 Bently Nevada 330130-040-02-CN
3500 Power Supply
The 3500 Power Supply can be ordered for ac or dc input power, providing compatibility with voltage sources worldwide. Line
noise filters are standard. The 3500 Rack can operate from a single supply, or dual supplies can be used to provide redundancy for situations
that cannot tolerate power interruption. Dual supplies reside in the upper and lower positions of the left rack slot. Redundant supplies
can use separate voltage sources. For example, the primary (lower) supply can operate with 120 Vac power while the backup (upper) supply
can be powered from an uninterruptible 24 Vdc source. Each supply can individually provide power to the entire rack and its modules.
BENTLY NEVADA 330101-00-27-10-02-05 3300 XL 8 mm Proximity Probes
BENTLY NEVADA21504-000-008-10-02Proximity Sensor Bently Nevada vibration
BENTLY NEVADA 21747-080-01 Proximitor Probe Extension Cable
Bently Nevada 330130-040-02-CN Bently Nevada vibration
1900/65A
The 1900/65A General Purpose Equipment Monitor is designed to continuously monitor and protect equipment that is used in a variety of applications and industries. The monitor’s low cost makes
it an ideal solution for generalpurpose machines and processes that can benefit from continuous monitoring and protection. Inputs The 1900/65A provides four transducer inputs and four temperature
inputs. Software can configure each transducer input to support 2- and 3-wire accelerometers, velocity sensors or proximity sensors. Each temperature input supports Type E, J, K, and T thermocouples,
and 2- or 3-wire RTDs. Outputs The 1900/65A provides six relay outputs, four 4-20 mA recorder outputs, and a dedicated buffered output.
Bently Nevada 1900/65A 172323-01/1900/65A 167699-02 3300 XL 8mm Proximity Probe
Bently Nevada 1900/65A 172323-01 1900/65A 167699-02 3300 XL 8mm Proximity Probe
Bently Nevada 1900/65 3300 XL 8mm Proximity Probe Bently Nevada vibration
Bently Nevada 330130-040-02-CN Bently Nevada vibration Bently Nevada vibration
330130-040-02-CN Bently Nevada vibration Bently Nevada Extension Cable
Bently Nevada vibration 330130-040-02-CN Bently Nevada Extension Cable
3500/42 Monitor Module
The primary purpose of the 3500/42 Monitor is to provide 1) machinery protection by continuously comparing current machine vibration against configured alarm setpoints to drive alarms and,
2) essential machine vibration information to both operator and maintenance personnel. Alarm setpoints are configured using the 3500 Rack Configuration Software. Alarm setpoints can be configured
for each active proportional value and danger setpoints can be configured for two of the active proportional values.
Bently Nevada 3500/42M 176449-02 Proximitor Seismic Monitor
Bently Nevada 3500/42M 140734-02 Proximitor Seismic Monitor
Bently Nevada 3500/42E 289837-01 Aeroderivitive GT Vibration Monitor
Bently Nevada 330130-040-02-CN Bently Nevada vibration
Bently Nevada Extension Cable 330130-040-02-CN Bently Nevada vibration
Bently Nevada vibration 330130-040-02-CN Bently Nevada Extension Cable
The 990 Vibration Transmitter
The 990 Vibration Transmitter is intended primarily for the original equipment manufacturers (OEMs) of centrifugal air compressors or small pumps, motors, or fans who
prefer to provide a simple 4 to 20 mA proportional vibration signal as the input to their machinery control system.Bently Nevada vibration
The transmitter is a two-wire, loop-powered device that accepts input from our 3300 NSv proximity probe and its matching extension cable (available in 5 m and 7 m system length options).
Bently Nevada 990-16-XX-01-CN Vibration Transmitter
Bently Nevada 990-10-XX-01-CN 167541-01 Vibration Transmitter
Bently Nevada 990-10-XX-01-05 MOD:285269-01 Vibration Transmitter
Bently Nevada 990-10-XX-01-05 Vibration Transmitter
Bently Nevada Extension Cable 330130-040-02-CN Bently Nevada vibration
Bently Nevada 330130 Bently Nevada 330130-040-02-CN Bently Nevada vibration
What was Bentley's role in industrialization?
l Timely and Relevant Data Acquisition
l Advanced Analysis and Visualizations
l Accurate Machinery Condition Diagnosis
l Early Fault Detection
l Predictive Maintenance Planning
l Extended Machine Life
l Reduced Maintenance Costs and Downtime
l Maximized Productio
Bently Nevada vibration
We also have Allen Bradley, Bently Nevada GE, Honeywell, ABB, Fanuc, Invensys Triconex,Bachmann and more PLC DCS TSI spare parts.
If you need more brands or discount,pls contact us without hesitation.
Email：sales@sparecenter.com
Mobile/what's app:+852 6980 6006
