Supply 330103-03-12-05-02-00 Bently Nevada Proximity Transducer System Wholesale Factory

Specifications
The 330103-03-12-05-02-00 Bently Nevada Proximity Transducer System is designed for precise vibration and position monitoring of industrial machinery. It features a high-sensitivity probe, extension cables, and excellent noise immunity, making it ideal for harsh industrial environments. This system offers accurate measurements for rotating machinery such as turbines, motors, and pumps, enabling predictive maintenance and early fault detection. It enhances system reliability, minimizes downtime, and ensures real-time diagnostics, contributing to optimal performance and operational safety.
Brand	Bently Nevada
Product Number	330103-03-12-05-02-00
Product Type	Proximity Transducer System
Unthreaded Length Option	03 = 30 mm
Overall Case Length Option	12 = 120 mm
Total Length Option	05 = 0.5 meter (1.6 feet)
Connector and Cable-Type Option	02 = Miniature coaxial ClickLoc connector, standard cable
Agency Approval Option	Not required

High Sensitivity

Provides precise measurements for accurate vibration and position monitoring.

Noise Immunity

Excellent resistance to electrical interference, ensuring reliable data in industrial environments.

Durable Construction

Built to withstand harsh conditions and high-vibration environments, ideal for rotating machinery.

If you want to more details，please contact me without hesitate.Email：sales@sparecenter.com

Incremental Scale Factor (ISF)	7.87 V/mm (200 mV/mil) +12.5%/-20% including interchangeability error when measured in increments of 0.25 mm (10 mils) over the 1.5 mm (60 mil) linear range.
Deviation from best fit straight line (DSL)	Less than ±0.06 mm (±2.3 mils).
Frequency Response	0 to 10 kHz: +0, -3 dB typical, with up to 305 meters (1000 feet) of field wiring.
Target Size (flat target)	Minimum: 8.9 mm (0.35 in) diameter Recommended minimum: 13 mm (0.5 in) diameter Axial position measurements on shaft diameters smaller than 13 mm (0.5 in) will generally result in a change in scale factor. Reducing the gap between the probe and target will help limit the change in scale factor. See Figure 12 for additional information.