Supply BENTLY NEVADA 330130-080-01-00 Proximity Transducer System Wholesale Factory

Product Specifications

Extension Cable Capacitance	69.9 pF/m (21.3 pF/ft) typical
Field Wiring	0.2 to 1.5 mm2 (16 to 24 AWG). Recommend using 3 conductor shielded triad cable and tinned field wiring. Maximum length of 305 meters (1,000 feet) between the 3300 XL Proximitor Sensor and the monitor. See the frequency response graphs, Figures 10 and 12, for signal rolloff at high frequencies when using longer field wiring lengths.
Linear Range	2 mm (80 mils). Linear range begins at approximately 0.25 mm (10 mils) from target and is from 0.25 to 2.3 mm (10 to 90 mils) (approximately –1 to –17 Vdc).
Recommended Gap Setting for Radial Vibration	-9 Vdc [approximately 1.27 mm (50 mils)]
Incremental Scale Factor (ISF)
Standard 5 or 1 meter System	7.87 V/mm (200 mV/mil) ± 5% including interchangeability error when measured in increments of 0.25 mm (10 mils) over the 80 mil linear range from 0°C to +45°C (+32°F to +113°F).
Standard 9 meter System	7.87 V/mm (200 mV/mil) ± 6.5% including interchangeability error when measured in increments of 0.25 mm (10 mils) over the 80 mil linear range from 0°C to +45°C (+32°F to +113°F).
Extended Temperature Range (ETR) for 5 and 9 Meter Systems	7.87 V/mm (200 mV/mil) ± 6.5% including interchangeability error when measured in increments of 0.25 mm (10 mils) over the 80 mil linear range from 0°C to +45°C (+32°F to +113°F).
Deviation from best fit straight line (DSL)
Standard 9 meter System	Less than ±0.038 mm (±1.5 mil) with components at 0°C to +45°C (+32°F to +113°F).
Standard 5 or 1 meter System	Less than ±0.025 mm (±1 mil) with components at 0°C to +45°C (+32°F to +113°F).
Extended Temperature Range 5 and 9 meter Systems	Less than ±0.038 mm (±1.5 mil) with components at 0°C to +45°C (+32°F to +113°F).

FAQs of BENTLY NEVADA 330130-080-01-00

What is the primary function of the Bently Nevada 330130-080-01-00?

The 330130-080-01-00 Proximity Transducer System is designed to measure the vibration and displacement of rotating machinery, helping to monitor and protect equipment in critical industrial environments.

What are the key components of this transducer system?

The system typically includes a proximity probe, an extension cable, and a Proximitor sensor, which work together to detect changes in position and vibration levels of rotating or reciprocating machinery parts.

What is the measurement range of this transducer?

The 330130-080-01-00 transducer system has a measurement range of up to 80 mils (2 mm) for displacement measurements, depending on the application setup.

In which industries is this transducer commonly used?

It is widely used in industries like oil and gas, power generation, and manufacturing, where machinery monitoring is critical to prevent failures and downtime.