SIEMENS 6ES5465-4UA12 analog input module

6ES5465-4UA12 analog input module Compatibility: Dedicated for legacy SIMATIC S5 automation systems (S5-115U/135U/155U PLCs).

6ES5465-4UA12 analog input module Channels: 16 Analog Inputs.

6ES5465-4UA12 SIEMENS Electrical Isolation: Non-Floating (shared reference potential).

Hardware Required: Must be used with 6ES5498 Measuring Range Modules (2 modules for 8 ch, 4 modules for 16 ch).

Signal Types: Supports Voltage (e.g., 0-10V, ±10V), Current (e.g., 4-20mA, 0-20mA), and RTD (Pt100) via range modules.

Resolution: 12-bit precision conversion with built-in 50Hz/60Hz noise suppression.

Dimensions & Weight: Approx. 25.8 x 20.5 x 2.8 cm | Weight: 0.53 kg | Made in Germany.

Lifecycle Status: Discontinued legacy part. 

Power Off: Disconnect all main power to the S5 rack before inserting or removing the 6ES5465-4UA12 SIEMENS analog input module.

Range Modules: Insert the mandatory 6ES5498 measuring range modules into the back of the card first.

Slot Alignment: Align the 6ES5465-4UA12 SIEMENS analog input module with the chassis guide rails of the S5 tier.

Seating: Slide the card firmly into the backplane connector until it is fully seated.

Securing: Tighten the top and bottom retaining screws to secure the module to the rack.

Wiring: Connect the front connector block according to the non-floating (shared ground) pinout diagram.

If you want to more details about 6ES5465-4UA12 analog input module，please contact me without hesitate.Email：sales@sparecenter.com

Q1: Can the 6ES5465-4UA12 SIEMENS accept 4-20mA signals directly?

A1: No, the SIEMENS analog input module cannot accept 4-20mA signals directly out of the box. To read current or voltage signals, the SIEMENS 6ES5465-4UA12 requires the installation of specific 6ES5498 measuring range modules plugged into the back of the card.

Q2: Is the SIEMENS 6ES5465-4UA12 an isolated or non-isolated module?

A2: The SIEMENS analog input module is a non-floating (non-isolated) analog input module. This means all 16 input channels on the SIEMENS 6ES5465-4UA12 share a common reference potential (shared ground).

Q3: What should I do if my SIEMENS 6ES5465-4UA12 fails and is no longer available from the factory?

A3: As the SIEMENS analog input module is a discontinued legacy part, you can contact our spare parts center to purchase a fully tested, reliable replacement unit from our active stock. Alternatively, you can buy the official factory successor model, 6ES5465-4UA13, directly from us to seamlessly replace your faulty SIEMENS 6ES5465-4UA12 with zero program modifications.

Q4: How many measuring range modules do I need to buy for a fully loaded 6ES5465-4UA12 SIEMENS?

A4: To utilize all 16 analog input channels on the SIEMENS analog input module, you must purchase and install 4 measuring range modules. Each range module serves 4 channels, so a partially used SIEMENS 6ES5465-4UA12 with only 8 active channels would require 2 modules.

Q5: Can I hot-swap the SIEMENS 6ES5465-4UA12 while the SIMATIC S5 PLC system is running?

A5: No, the SIEMENS analog input module does not support hot-swapping. You must completely switch off the main power supply to the PLC rack before removing or inserting the SIEMENS analog input module to prevent electrical damage to the backplane.

We maintain one of Asia's largest inventories with over 1,000,000 products ready for same-day shipping to over 100 countries. To guarantee absolute reliability, every part passes strict original testing and supports third-party verification, all backed by fast global express delivery (DHL/FedEx/UPS) and dedicated multilingual support.

Email: sales@sparecenter.com